Hello Warriors,
Its time for my scheduled stream.
Tonight will be playing World of Tanks and get some Sub platoon going, its been awhile.
As usual 200 Tanks, EU: http://www.twitch.tv/ritagamer2
Engage!
Monday, 19 October 2015
Japanese and Chinese "new tanks"
Hello Warriors,
there are rumours circulating around other blogs that these images bellow will be the upcoming Chinese and Japanese tanks. I refuse to post anything important such as this without checking with my valuable sources and all came out saying that those news are a fake, both of them!
there are rumours circulating around other blogs that these images bellow will be the upcoming Chinese and Japanese tanks. I refuse to post anything important such as this without checking with my valuable sources and all came out saying that those news are a fake, both of them!
 |
| Tanks so cunning you could nearly stick tails on and call them weasels. |
Pz.Kpfw. 38 (t) n.A. Changes
Hello Warriors,
screenshots and Gif. of the Pz.Kpfw. 38 (t) n.A. changes for you.
Note: I will be making separate posts for each tank that received the biggest changes as they are picture heavy and then stack the minor ones together in one post.
There is a tiny bit of information that was missing:
- Speed Limit got buffed to 64/20 (62/20 Previous)
And lest remember what was posted previously:
- View ports are now as thick as the surrounding armor, not thinner.
- Small 70mm thick parts on UFP removed.
- Autobounce plate is now 15-10mm instead of 35-25mm. The 15mm are where the spare tracks are. - Hull roof is 10mm thick now for the most part instead of 8mm. The opposite happened for the stock turret.
- Stock turret cupola is now 30mm instead of 30-22mm.
- Front part of the "turret ring" is now 25mm instead of 30mm.
- Mantlet is now 50mm thick instead of 25mm and the armor above and below it is 50mm instead of 30mm.
- Spaced armor to the sides of the mantlet are now 10mm instead of 22mm.
- Top turret is no longer a clusterf**k of different armor thicknesses.
- The armor from the viewports on the side no longer stick out on the hitbox.
- The side armor was nerfed from 25mm to 20mm though the rear was increased from 10mm to 20mm.
- The turret face is now 30mm instead of 50mm.
- Mantlet is 30mm instead of 25mm.
screenshots and Gif. of the Pz.Kpfw. 38 (t) n.A. changes for you.
Note: I will be making separate posts for each tank that received the biggest changes as they are picture heavy and then stack the minor ones together in one post.
There is a tiny bit of information that was missing:
- Speed Limit got buffed to 64/20 (62/20 Previous)
And lest remember what was posted previously:
- View ports are now as thick as the surrounding armor, not thinner.
- Small 70mm thick parts on UFP removed.
- Autobounce plate is now 15-10mm instead of 35-25mm. The 15mm are where the spare tracks are. - Hull roof is 10mm thick now for the most part instead of 8mm. The opposite happened for the stock turret.
- Stock turret cupola is now 30mm instead of 30-22mm.
- Front part of the "turret ring" is now 25mm instead of 30mm.
- Mantlet is now 50mm thick instead of 25mm and the armor above and below it is 50mm instead of 30mm.
- Spaced armor to the sides of the mantlet are now 10mm instead of 22mm.
- Top turret is no longer a clusterf**k of different armor thicknesses.
- The armor from the viewports on the side no longer stick out on the hitbox.
- The side armor was nerfed from 25mm to 20mm though the rear was increased from 10mm to 20mm.
- The turret face is now 30mm instead of 50mm.
- Mantlet is 30mm instead of 25mm.
3D Model
 |
| Gif. |
David Fletcher MBE Tank Chats: Crossley Chevrolet Armoured Car
Hello Warriors,
was starting to get worried that Tank Chats wasn't going to come this month... this time, my favourite tank story-teller grandpa David Fletcher from The Tank Museum talks about the Crossley Chevrolet Armoured Car:
Enjoy! :)
was starting to get worried that Tank Chats wasn't going to come this month... this time, my favourite tank story-teller grandpa David Fletcher from The Tank Museum talks about the Crossley Chevrolet Armoured Car:
Enjoy! :)
KV-1 Changes
Hello Warriors,
took screenshots and made Gifs of the KV-1 Armor and 3D model changes, all neatly packed. I'm going to start doing these to help you visualize better the changes.
Lets remember what was posted a couple days ago:
- Beak between the autobounce plate and the LFP is now 110mm on the LFP and 65mm on the autobounce plate. Was 115mm on both before.
- Driver and MG weakspots removed, but the 60mm part on the rear hull is now 50mm.
- UFP nerfed from 31° to 30°, LFP buffed from 21° to 30°.
- 30mm zone for engine deck now covers more, ended about when it's under the very rear of the turret.
- Mantlet shape is more flat for the 85mm and there is less overlap between the mantlet and turret armor.
- MG weakspot on the rear of the turret is removed on both turrets.
- Turret front slope buffed from 11° to 19°.
- Most periscopes removed from the hitbox on both turrets.
- The stock turret front slope is buffed from 16°-11° to 19°.
took screenshots and made Gifs of the KV-1 Armor and 3D model changes, all neatly packed. I'm going to start doing these to help you visualize better the changes.
Lets remember what was posted a couple days ago:
- Beak between the autobounce plate and the LFP is now 110mm on the LFP and 65mm on the autobounce plate. Was 115mm on both before.
- Driver and MG weakspots removed, but the 60mm part on the rear hull is now 50mm.
- UFP nerfed from 31° to 30°, LFP buffed from 21° to 30°.
- 30mm zone for engine deck now covers more, ended about when it's under the very rear of the turret.
- Mantlet shape is more flat for the 85mm and there is less overlap between the mantlet and turret armor.
- MG weakspot on the rear of the turret is removed on both turrets.
- Turret front slope buffed from 11° to 19°.
- Most periscopes removed from the hitbox on both turrets.
- The stock turret front slope is buffed from 16°-11° to 19°.
3D Model
 |
| Gif. |